CompX eLock 200 Series is a keyless, non-network, electronic access control lock for cabinetry, refrigerators, freezers and incubators. Audit trails of the last 15,000 access attempts track date, time and user name. Temperature monitoring is also available.
CompX eLock 200 Series, available in cabinet and refrigerator versions, allows for audit trail reporting (last 15,000 access attempts) and up to 3,000 unique ID codes to be entered. It is a keyless system – there are NO keys to lose or share. The eLocks can be programmed to read a facility's existing employee identification cards using HID proximity, HID iCLASS proximity, or magnetic card credentials. Additionally, temperature monitoring is available with the cold storage version with or without access control.
Cabinet version has three components — eLock controller, battery pack and latch — eLock controller mounts directly on the outside of the cabinet door or drawer, while the battery pack and latch are mounted inside. Refrigerator / freezer versions have all three components enclosed in a housing, which mounts directly to the appliance door. The strike plate is easily mounted on the top or side of the appliance and provides a secure latching point for the latch. Both cabinet and refrigerator versions use the same motor-driven latch mechanism that provides automatic relocking.
CompX eLock 200 Series is a keyless, non-network electronic access control lock for cabinetry. Since the eLock is keyless system, there are NO keys to lose or share. The eLock also provides a comprehensive audit trail of the last 15,000 access attempts - including date, time and user name – which can be downloaded and viewed with LockView 5 software.
The eLock can hold up to 3,000 unique user codes and can be programmed to read a facility's existing employee identification cards using HID proximity, HID iCLASS proximity, or magnetic card credentials.
The cabinet version has three components: eLock controller, battery pack and latch. The eLock controller mounts directly on the outside of the cabinet door or drawer, while the battery pack (6-AA) and latch are mounted inside. Since the batteries are located inside the cabinet, every eLock unit includes a jump start 9-volt power port, which allows the user – with a valid credential – to access the eLock when the batteries are exhausted. All eLocks have non-volatile memory, ensuring that all users, audit trails and other programmed features are not lost in the event of a power outage.
The motorized spring-loaded latch provides the convenience of automatic relocking – no need to enter a credential to lock the door or drawer – allowing users to access or return items quickly.
To download audit trails, set up time-based restrictions or other programmed features, LockView 5 software installed on a Windows based laptop is required. The LockView 5 software kit includes software flash drive and USB/mini USB cable. The USB port is located on the bottom side of the eLock controller.
CompX eLock 200 Series is a keyless, non-network electronic access control lock for refrigerators / freezers. CompX eLock eliminates manual temperature logging, prevents human error and automatically records temperature at programmed intervals. All data history is archived and easily accessible. Since the eLock is keyless system there are NO keys to lose or share. The eLock also provides a comprehensive audit trail of the last 15,000 access attempts - including date, time and user name – which can be downloaded and viewed with LockView 5 software.
The eLock can hold up to 3,000 unique user codes and can be programmed to read facility's existing employee identification cards using HID proximity, HID iCLASS proximity, or magnetic card credentials.
The eLock with standard temperature monitoring, monitors internal temperature of 100°C to -40°C; ultra-low temperature monitoring, 100°C to -100°C. Records up to 500,000 data points and provides programmable charts, graphs and reports. Events such as out-of-temperature-range, alarms at the unit only and allows users to enter notes on action taken. The CompX eLock complies with joint Commission standards and is 21 CFR Part 11 compliant.
Refrigerator / freezer versions have all three components – eLock unit, battery pack, and latch - enclosed in a housing which mounts directly on to the appliance door. The strike plate is easily mounted on the top or side of the appliance and supplies a secure latching point for the latch. The motorized spring loaded latch provides the convenience of automatic relocking – eliminating the need for cumbersome hasps and padlocks. The eLock is powered by 6-AA batteries (9-volt wall adaptor port is available) and all eLocks have non-volatile memory ensuring that all users, audit trails and other programmed features are not lost due to loss of power.
To download audit trails and/or temperature logs, set up time-based restrictions or other programmed features, LockView 5 software installed on a Windows based laptop is required. The LockView 5 software kit includes software flash drive and USB/mini USB cable. The USB port is located on the left side of the eLock housing.
eLock also available as access control only or as temperature monitoring only.
Standard warranty on electronics is 1 year from date of purchase and registration.
This is only a fraction of CompX eLock options. CompX Security Products has the design and engineering capabilities to meet specific application needs. Contact us for more information or call 847-752-2500. Or click to compare eLock versions.
Get the latest info on new products, promotions, trade shows and events - delivered right to your inbox.
CompX Security Products
Phone: 847.752.2500 | Fax: 847.752.2419
715 Center St., Grayslake, IL 60030